block cylinder with integrated proximitiy switches up to 400 bar - BLZNI400

čeština	dansk
Deutsch	English
español	français
italiano	한국어
Nederlands	polski
português	русский
slovenščina	svenska
中文

{heb/blockzylinder/blzni400_asmtab.prj},{NB=BLZNI400-1-50/32/15-206/B1/S37 (p=400 L3=52, L4=35, d2G=M20, 01)},{KOLBEN=50},{D2=32},{SW=27},{BX=14.000},{B1X=45.000},{B2=75},{B3X=76.000},{B4=100},{B5X=63.000},{B6X=59.000},{B7=71},{B8=100},{C1X=13.000},{C2X=6.000},{C3X=10.000},{C4X=5.000},{D3X=13.000},{D4X=13.000},{D6X=6.500},{D8=31.0},{D9X=8.500},{E1X=80.000},{E2X=40.000},{L2=44},{L3=30},{L5=27.0},{L7X=35.000},{L8X=52.000},{L12X=27.000},{L14X=18.000},{L15=17},{L19=30},{L24=24},{L25X=27.000},{L27X=16.000},{DLX=8},{TX=5.000},{NENNDRUCK=400},{BA=1},{S48=},{HUB=15.00},{HUBWAHL=1.000},{HUBST=0.00},{FUNKTIONSART=206},{KSTGENDE=/B1},{D2GA6=M20},{L4A5=35.0},{L3A4=52.0},{SA=},{SPV=},{S5=/S37},{S7=},{ELV=},{S13=},{ZE=},{N2N4POS=0},{DRS=}

Please select the desired product according to technical criteria. Selectable attributes are highlighted with the table icon. Selections can be reset by clicking on the table icon or on the value.

Add for comparison

Selectable products: 12

HELP_VARIABLE

Company

HEB

Description

block cylinder with integrated proximitiy switches up to 400 bar - BLZNI400

Bill of material

Baugruppe BLZNI400-1-50/32/15-206/B1/S37

NENNDRUCK

Nominal pressure

bar

KOLBEN

piston - Ø

Piston rod - Ø

Construction form

1 - 2 cross borings, from 160 bar a support is necessary

1.1 - 2 thread borings, from 160 bar a support is necessary

1.2 - 2 thread borings, from 160 bar a support is necessary

2 - 4 longitudinal borings with counter bore at base

2.1 - 4 thread borings at front

3 - 4 longitudinal borings with counter bore at front

3.1 - 4 thread borings at base

4.1 - 4 cross borings, o-ring connections side 1, from 160 bar a support is necessary

5.1 - 4 thread borings, o-ring connections side 1, from 160 bar a support is necessary

6 - 4 cross borings, o-ring connections side 2

6.1 - 4 thread borings, o-ring connections side 2

6.4 - 4 cross borings, o-ring connections side 4

6.14 - 4 thread borings, o-ring connections side 4

7 - 4 longitudinal borings with counter bore at base, o-ring connections at front

7.1 - 4 thread borings at front, o-ring connections at front

8 - 4 longitudinal borings with counter bore at front, o-ring connections at base

8.1 - 4 thread borings at back, o-ring connections at base

S48

construction form variant

mounting holes without countersink for screws

S48 - Mounting holes with countersink for screws according to DIN EN ISO 4762, page 4

S48-2 - Mounting holes with countersink for screws according to DIN EN ISO 4762, page 2

HUB

Stroke

Enter value for HUB

Stroke

inch

HUBWAHL

Standard / Special / travel limiter

Standard stroke

HUBST

extended position

Enter value for HUBST

extended position

inch

FUNKTIONSART

Operating mode

206 - double-acting

209 - double-acting, stroke-end cushioning at both sides

211 - double-acting, stroke-end cushioning at front

213 - double-acting, stroke-end cushioning at base

200 - single-acting, pushing action, return by external force

201 - single-acting, pulling action, return by external force

KSTGENDE

piston rod end

B1 - piston rod end with external thread

B1.1 - Piston rod end with external thread to customer specification

M1 - piston-rod end with internal thread

M1.1 - piston rod end with internal thread according to customer requirements

D2GA6

D2G/A6 thread

M20

L4A5

L4/A5 thread length

35.0

L3A4

L3/A4 Piston Rod Protrusion

52.0

sensor selection

Sensor with integral cable

S4 - sensors with plug socket and right-angle plug, 5m cable

S10 - sensors with plug socket and straight plug, 5m cable

S4.120 - sensors with plug socket and right-angle plug, 5m cable, temperature up to 120°C

S10.120 - sensors with plug socket and straight plug, 5m cable, temperature up to 120°C

S43 - sensors with plug socket without plug

S120 - sensors with plug sockets, temperature up to 120 ° C

S18 - prepared for sensors

SPV

Displacement of the sensing point

Sensing point rod-side 0.5 mm before stroke end

Sensing point rod-side 1 mm before stroke end

Sensing point rod-side 1.5 mm before stroke end

Sensing point rod-side 2 mm before stroke end

Sensing point rod-side 2.5 mm before stroke end

Sensing point rod-side 3 mm before stroke end

Sensing point rod-side 3.5 mm before stroke end

Sensing point rod-side 4 mm before stroke end

Sensing point rod-side 4.5 mm before stroke end

Sensing point rod-side 5 mm before stroke end

Sensing point piston-side 0.5 mm before stroke end

Sensing point piston-side 1 mm before stroke end

Sensing point piston-side 1.5 mm before stroke end

Sensing point piston-side 2 mm before stroke end

Sensing point piston-side 2.5 mm before stroke end

Sensing point piston-side 3 mm before stroke end

Sensing point piston-side 3.5 mm before stroke end

Sensing point piston-side 4 mm before stroke end

Sensing point piston-side 4.5 mm before stroke end

Sensing point piston-side 5 mm before stroke end

Sensing point both-side 0.5 mm before stroke end

Sensing point both-side 1 mm before stroke end

Sensing point both-side 1.5 mm before stroke end

Sensing point both-side 2 mm before stroke end

Sensing point both-side 2.5 mm before stroke end

Sensing point both-side 3 mm before stroke end

Sensing point both-side 3.5 mm before stroke end

Sensing point both-side 4 mm before stroke end

Sensing point both-side 4.5 mm before stroke end

Sensing point both-side 5 mm before stroke end

Seal selection

S37 - Seals for stick-slip-free operation with lowest friction losses

S5/S37 - seals for hydrofluids H / HL / HLP from 100°C to 200°C (Viton) / Seals for stick-slip-free operation with lowest friction losses

S35/S37 - pistons statically sealed (load holding function) / Seals for stick-slip-free operation with lowest friction losses

S5/S35/S37 - seals for hydrofluids H / HL / HLP from 100°C to 200°C (Viton) / pistons statically sealed (load holding function) / Seals for stick-slip-free operation with lowest friction losses

Air bleed

S7 - bleeding screws at both sides

S72 - bleeding screws at both sides short

ELV

Possible ventilation

S13

Piston rod selection

hard-chromed piston surface

S13 - piston-rod hardened and hard-chrome plated

S14 - piston-rod made of material 1.4301, hard-chome plated

Groove/centering collar

N2 - groove side 2

N4 - groove side 4

N2.1 - groove side 2 to the wishes of the customer

N4.1 - groove side 4 to the wishes of the customer

N2N4POS

Slot position

DRS

Pressure screw

Connection

G 1/4

length of cushioning

Width across flats

Piston area (extending)

19.62

cm2

Piston area (retracting)

11.59

cm2

FAK

Pushing power at rated pressure

7850

daN

FAR

Pulling power at rated pressure

4635

daN

No Third-party Cookies supported

Baugruppe BLZNI400-1-50/32/15-206/B1/S37