Directional Flow Control Valves

English

CAD model selection

Selectable products: 39

HELP_VARIABLE


Company	Air Logic
Description	Directional Flow Control Valves
Bill of material	F2804404101B86
PREVIEW Preview
PRODUCT_ID Product ID	F2804404101B86 F2804404101B86
MANUFACTURER_PART_NUMBER Manufacturer Part Number	F2804404101B86 F2804404101B86
PRODUCT_NAME Product Name	Directional Flow Control Valves - F2804404101B86 Directional Flow Control Valves - F2804404101B86
PRODUCT_LONG_DESCRIPTION Product Long Description	Directional Flow Controls apply orifice technology in one flow direction and free flow in the other. They work on the principal of Flow Restriction with the orifice diameter being identified in the part number. In addition to orifice diameter, Air Logic controls many smaller factors that have an impact on the total restriction of the orifice. A moving disk changes position based on the flow in the circuit. In the controlled direction, the orifice is the only path the media can flow through. In the opposite direction, the disk moves and the media is free to flow through the product unrestricted.
PART_NUMBER_DESCRIPTION Part Number Description	Directional Flow Control Valve 0.010 Inch, .170 Inch Pre-Installed Barbs Directional Flow Control Valve 0.010 Inch, .170 Inch Pre-Installed Barbs
COLOR color	Gray
CONNECTION_SIZE connection size
TUBING_INSIDE_DIAMETER_ID_IN tubing inside diameter id in	0.170 0.170
CONNECTION_TYPE connection type	Barbed Barbed
TYPICAL_TUBE_RETENTION_PRESSURE_BAR typical tube retention pressure bar	8.6 8.6
TYPICAL_TUBE_RETENTION_PRESSURE_PSI typical tube retention pressure psi	125 125
INSTALLATION_METHOD_IN_LB installation method in·lb
MAXIMUM_PRESSURE_BAR maximum pressure bar	5.2
MAXIMUM_PRESSURE_PSI maximum pressure psi	75
NOMINAL_ORIFICE_SIZE_IN nominal orifice size in	0.01 0.01
ORIFICE orifice	101 101
REACH reach	Yes
RECOMMENDED_SYSTEM_FILTRATION_UM recommended system filtration um	5
RESTRICTION_OF_HAZARDOUS_SUBSTANCES_ROHS_3 restriction of hazardous substances rohs 3	Yes
INSTALLATION_METHOD installation method	Push-In Push-In
WETTED_MATERIAL wetted material	Nylon; Polysulfone (PSU); Silicone (Si); Stainless Steel (SS) Nylon; Polysulfone (PSU); Silicone (Si); Stainless Steel (SS)
BARB barb	0.170" 0.170"

No Third-party Cookies supported

F2804404101B86