RV5 - Surge suppressor - ABB Low Voltage & Systems

CAD model selection

Add for comparison

Selectable products: 4

HELP_VARIABLE


Company	ABB Low Voltage & Systems
Description	RV5 - Surge suppressor
Bill of material	ABB - 1SBN050010R1001 + RV5/133 Surge Suppressor
PN Product ID	1SBN050010R1001 1SBN050010R1001
EXTTYPE Extended Product Type	RV5/133 RV5/133
INVDES Invoice Description	RV5/133 Surge Suppressor RV5/133 Surge Suppressor
DES Description	varistor - AC or DC control voltage
DESCLONG Long Description	RV5/133 is a varistor surge suppressor designed to reduce the maximum overvoltage peak value and to limit or even completely eliminate the high pre-damping voltage frequencies, when used with an AC operated conventional contactor for a rated control circuit voltage between 50 ...133 V AC 50/60Hz or with a DC operated conventional contactor for a rated control circuit voltage between 50 ...133 V DC. The operation of inductive circuits causes overvoltages, in particular on opening of the contactor coil. The electromagnetic energy stored in the coil during contactor closing is restored on opening in the form of surges, the slope and amplitude of which may rise to several kilovolts. A number of drawbacks are observed ranging from interference on the electronic devices to breakdown of insulators and even destruction of certain sensitive components. Note: A varistor is a resistor whose value decreases to a very large extent when a certain voltage is applied at its terminals. Advantages: - the surge suppressor is clipped onto the top or side part in regards with the contactor or contactor relay base design without change in device overall dimensions. - high energy absorption: good damping - Unpolarized system. Drawback: clipping as from the varistor operating voltage, thus voltage front up to this point. RV5/133 is a varistor surge suppressor designed to reduce the maximum overvoltage peak value and to limit or even completely eliminate the high pre-damping voltage frequencies, when used with an AC operated conventional contactor for a rated control circuit voltage between 50 ...133 V AC 50/60Hz or with a DC operated conventional contactor for a rated control circuit voltage between 50 ...133 V DC. The operation of inductive circuits causes overvoltages, in particular on opening of the contactor coil. The electromagnetic energy stored in the coil during contactor closing is restored on opening in the form of surges, the slope and amplitude of which may rise to several kilovolts. A number of drawbacks are observed ranging from interference on the electronic devices to breakdown of insulators and even destruction of certain sensitive components. Note: A varistor is a resistor whose value decreases to a very large extent when a certain voltage is applied at its terminals. Advantages: - the surge suppressor is clipped onto the top or side part in regards with the contactor or contactor relay base design without change in device overall dimensions. - high energy absorption: good damping - Unpolarized system. Drawback: clipping as from the varistor operating voltage, thus voltage front up to this point.
INTNO International product number	3471522121332 3471522121332
MANUID Product number of the Manufacturer	1SBN050010R1001 1SBN050010R1001
EF000215 Type of accessory/spare part	Other
CTN Customs tariff number	85363030
WEBLINK Deeplink product page	Link to product detail page
TYPE Type	RV5/133 RV5/133