APC_HC_001 - Split plummer block housings – SNL 2, 3, 5 and 6 series

English

CAD model selection

Selectable products: 176

HELP_VARIABLE


Company	SKF
Description	APC_HC_001 - Split plummer block housings – SNL 2, 3, 5 and 6 series
Bill of material	SKF_SSNLD 520-617
DESIGNATION Designation	SSNLD 520-617 SSNLD 520-617
SEAL Oil Seal
DDA Da - Diameter of bearing seat	180.000 180.000	mm
GT GT- Tolerance class of bearing seat diameter	G7
CA Ca - Width of bearing seat	70.000 70.000	mm
H1 H1 - Centre height of bearing seat	112.000 112.000	mm
DB Db - Bore diameter	137.500 137.500	mm
A A - Overall width	160.000 160.000	mm
A1 A1 - Foot width	110.000 110.000	mm
G1 G1 - Thread for relubrication holes	1/8-27 NPSF 1/8-27 NPSF
H H - Overall height	218.000 218.000	mm
H2 H2 - Foot height	40.000 40.000	mm
L L - Overall length	380.000 380.000	mm
J J - Distance between attachment bolts	320.000 320.000	mm
J1 J1 - Axial distance between attachment bolts	66.000 66.000	mm
J2 J2 - Distance between attachment bolts	300.000 300.000	mm
N N - Length of attachment bolt hole		mm
N1 N1 - Width of attachment bolt hole		mm
N2 N2 - Diameter of attachment bolt hole		mm
A3 A3 - Inside width between seal grooves	131.000 131.000	mm
A4 A4 - Width of seal groove	6.000 6.000	mm
A5 A5 - Distance to seal groove back face	10.000 10.000	mm
A6 A6 - Width at bore diameter	14.000 14.000	mm
DC Dc - Diameter of seal groove	147.500 147.500	mm
JA Ja - Position of grease escape hole	0.000 0.000	mm
N3 N3 - Diameter fo grease escape hole	0.000 0.000	mm
ALPHA Alpha - Angle for grease escape hole	0 0	deg
JV Jv - Position of grease escape hole	0.000 0.000
HV Hv - Distance housing bottom to oil inlet, housing base	0.000 0.000
GV Gv - Thread of grease escape hole
J6 J6 - Distance between dowel pins	348.000 348.000	mm
J7 J7 - Axial offset of dowel pins	39.000 39.000	mm
N4 N4 - Diameter of dowel pins	8.000 8.000	mm
P0 P0° - Breaking load at 0° load angle	846.000 846.000	kN
P55 P55° - Breaking load at 55° load angle	1116.000 1116.000	kN
P90 P90° - Breaking load at 90° load angle	666.000 666.000	kN
P120 P120° - Breaking load at 120° load angle	504.000 504.000	kN
P150 P150° - Breaking load at 150° load angle	450.000 450.000	kN
P180 P180° - Breaking load at 180° load angle	558.000 558.000	kN
PA Pa - Breaking load, axial	360.000 360.000	kN
Q120 Q120° - Load to reach yield point at 120° load angle	868.000 868.000	kN
Q150 Q150° - Load to reach yield point at 150° load angle	504.000 504.000	kN
Q180 Q180° - Load to reach yield point at 180° load angle	434.000 434.000	kN
HM HM - Housing material	Spheroidal graphite cast iron Spheroidal graphite cast iron
PCP PCP - Paint, corrosion protection	In accordance with ISO 12944-2 corrosivity category C2 In accordance with ISO 12944-2 corrosivity category C2
MASS Mass housing	17.600 17.600	kg
G G - Recommended diameter of attachment bolts		mm
AABRTT Appropriate attachment bolt, rec. tightening torque		N*m
CBS Cap bolt, size	M20x100 M20x100
CBRTT Cap bolt, rec. tightening torque	200 200	N*m
IGF20 Initial grease fill, 20%	390 390	g
IGF40 Initial grease fill, 40%	630 630	g
EBS Eye bolt, size