Flange Bushings - SPF - OILES CORPORATION

English	日本語

CADモデル選択

選択可能な製品数: 119

HELP_VARIABLE


Company	OILES CORPORATION
Description	Flange Bushings - SPF
Bill of material	SPF-2550
ORDERNO Order number	SPF-2550 SPF-2550
S Shaft Diameter	25.0 25.0	mm
H Housing diameter	35 35	mm
ID Inner Diameter	25.0 25.0	mm
IDT Inner Diameter Tolerance	+0.061/+0.040 +0.061/+0.040	mm
IDR Inner Diameter Tolerance after press	+0.032/+0.011 +0.032/+0.011	mm
OD Bushing Outer Diameter	35 35	mm
ODT Outer Diameter Tolerance	+0.050/+0.034 +0.050/+0.034	mm
F Flange Diameter	45 45	mm
FDT Flange Diameter Tolerance	0/-0.3	mm
FT Flange Thickness	5.0 5.0	mm
FTT Flange Thickness Toleramce	0/-0.1	mm
L Length	50.0 50.0	mm
LT Length Tolerance	-0.1/-0.3
P Allowable max. Pressure	29.0N/mm2 (296kgf/cm2)
VD Allowable max. Velocity (Dry)	0.50m/s (30m/min)
VL Allowable max. Velocity (periodic lubrication)	1.00m/s (60m/min)
PVD Allowable max. PV value (Dry)	1.65N/mm2•m/s (1,010kgf/cm2•m/min)
PVL Allowable max. PV value (periodic lubrication)	3.25N/mm2•m/s (1,990kgf/cm2•m/min) 3.25N/mm2•m/s (1,990kgf/cm2•m/min)
ATL About Thrust Load	Flange surface is not subject to a thrust load as no lubricant is embedded.
AIT About Bearing Inner Diameter Tolerance	The I.D. tolerance after press fitting is for reference only.
CAU Caution	Please refer to catalog about detail.

サードパーティの Cookie はサポートされていません