Form SP3 - Pneumatic clamping lever

English	italiano

CAD模型选择

停产产品

本产品自 2021年2月28日停产，不建议将其用于新的产品/项目

对应替代品

未指定有效的替换零件。如有疑问，请联系制造商。

可提供的产品: 5

HELP_VARIABLE


Company	Speedyblock
Description	Form SP3 - Pneumatic clamping lever
Bill of material	360/SPM
CODICE Code	AO362 AO362
MODELLO Description	360/SPM 360/SPM
FAM Family	Toggle clamps
SER Series	Pneumatic
USE Characteristics and applications	Form SP3 Tool equipped with normal pneumatic cylinder. Form SPM Tool equipped with magnetic pneumatic cylinder. Cylinder: Maximum operating pressure 6 bar. Maximum operating temperature 80°C. The AU460 model reed switch is used for detecting the position, for sizes 360 and 1100; model AU450 is used for size 2100 (see Accessories). The proximity switches must be ordered separately. Spindles: To be ordered separately (see Accessories). Features and applications: We recommend using a filter-reducerlubricator group for a long and smooth operation of the cylinder, while for a long duration of the mechanical components we recommend using suitable flow regulators and calibrating the speed of the motions desired, starting from a low speed and gradually increasing this speed. A special grease is placed between two contacting surfaces during assembly.
EQUIPAGGIAMENTO Kit	Magnetic pneumatic cylinder Magnetic pneumatic cylinder
TRANSL straight-line action stroke		mm 输入参数值： TRANSL straight-line action stroke mm cm inch ft
A	260 260	mm
B	72.5 72.5	mm
C	27.5 27.5	mm
D	32 32	mm
E	55 55	mm
F	116 116	mm
G	33.5 33.5	mm
H	36.5 36.5	mm
I	- -	mm
L	30 30	mm
M	M8 M8
N	15 15	mm
O	34 34	mm
P	12 12	mm
Q	5.5 5.5	mm
R	8.5 8.5	mm
S	1/8" 1/8"
X	22 22	mm
FH	560 560	daN
FS	310 310	daN
GR	1300 1300	g

无法支持该第三方Cookies