FW 1850 Two-stage-ejector with stroke - DME - D-M-E

??

CADモデル選択

パーツ比較に追加

選択可能な製品数: 4

HELP_VARIABLE


Company	D-M-E
Description	FW 1850 Two-stage-ejector with stroke - DME
Bill of material	FW1850058040
REF Catalog Number	FW1850058040 FW1850058040
D Diameter d	58 58	mm
H1 Stroke		mm Enter value for H1 Stroke mm cm inch ft
H1MAX H1 max	40 40	mm
H1MIN H1 min	5 5	mm
D1 Diameter d1	22 22	mm
D2 Thread d2	M16 M16
D3 Diameter d3	64 64	mm
D4 Diameter d4	90 90	mm
D6 Thread d6	M45x1.5 M45x1.5
D7 Diameter d7	36.0 36.0	mm
D8 Thread d8	M14x1.5 M14x1.5
D9 Thread d9	M8x20 M8x20
R Radius	36 36	mm
L1 Length l1	42 42	mm
L2 Length l2	15 15	mm
L3 Length l3	68 68	mm
L4 Length l4	16 16	mm
L5 Length l5	25 25	mm
L6 Length l6	17 17	mm
L7MAX Length l7 max.	45 45	mm
L8MAX Length l8 max.	66 66	mm
L11 Length l1 1	200 200	mm
L12 Length l1 2	44 44	mm
SW1 Accross-flats dimension	18 18	mm
SW2 Accross-flats dimension	18 18	mm
SW3 Accross-flats dimension	41 41	mm
SW3NM Force	160 160	Nm
SW4 Accross-flats dimension	55 55	mm
SW5 Accross-flats dimension	8 8	mm
SW6 Accross-flats dimension	32 32	mm

追加の情報

このページを訪れたユーザーが閲覧したその他のデータ

FW 1851 Two-stage-ejector with stroke - DME

FW 1851 Two-stage-ejector with stroke - DMED-M-E 27.11.2017

TSTL20A, TSTL26A, TSTL32A - 2 Stage Ejector Top Last (TSTL)

TSTL20A, TSTL26A, TSTL32A - 2 Stage Ejector Top Last (TSTL)D-M-E 03.04.2024

N Connector plugs with teflon seal - DME

N Connector plugs with teflon seal - DMED-M-E 03.04.2024

ULB Core blades - DME - Mat.: DME 5 (1.2344, 38-42 HRC)

ULB Core blades - DME - Mat.: DME 5 (1.2344, 38-42 HRC)D-M-E 08.08.2018

FW 1853 Ejector bolt - DME

FW 1853 Ejector bolt - DMED-M-E 27.11.2017

TL-20-Center Rod CR - DME

TL-20-Center Rod CR - DMED-M-E 27.11.2017

ST 15 Extension nipples - DME

ST 15 Extension nipples - DMED-M-E 08.08.2018

FN Connector plugs for FSK and FSVK - DME

FN Connector plugs for FSK and FSVK - DMED-M-E 03.04.2024

AEP Accelerated ejectors - Pin type - DME

AEP Accelerated ejectors - Pin type - DMED-M-E 27.11.2017

AEB Accelerated ejectors - bumper type - DME

AEB Accelerated ejectors - bumper type - DMED-M-E 27.11.2017

ULG T-gibs - DME - Mat.: 1.7225, Surface 60-70 HRC, Core 38-42 HRC

ULG T-gibs - DME - Mat.: 1.7225, Surface 60-70 HRC, Core 38-42 HRCD-M-E 03.04.2024

ULC U-couplings - DME - Mat.: DME 5 (1.2344), Surface 60-70 HRC, Core 38-42 HRC

ULC U-couplings - DME - Mat.: DME 5 (1.2344), Surface 60-70 HRC, Core 38-42...D-M-E 08.08.2018

WZ 1030 Pinion shafts - DME - Mat.: 1.2767 ~ 830 N/mm2

WZ 1030 Pinion shafts - DME - Mat.: 1.2767 ~ 830 N/mm2D-M-E 08.08.2018

FW 1910 Threaded bolt - DME

FW 1910 Threaded bolt - DMED-M-E 27.11.2017