$ {catalogItem}-$ {catalogLabel}

??

CAD모델 선택

부품 비교에 추가하기

사용 가능한 제품: 83

HELP_VARIABLE


Company	D-M-E
Description	GS 913 Grub screws - DME - DIN 913-45 H
Bill of material	GS913M08035
REF Catalog Number	GS913M08035 GS913M08035
D Thread d	M8 M8
L Length L	35 35	mm
T Depth t	5.0 5.0	mm
S Width Across Flats S	4.0 4.0	mm

추가 정보

이 사용자는 또한에 관심이있는 사용자를 보았습니다.

WZ 8090 Spring loaded set screws (with internal hexagon) - DME - Mat. 1.0716

WZ 8090 Spring loaded set screws (with internal hexagon) - DME - Mat. 1.071...D-M-E 04.08.2020

AWS-Knock out rods - DME - Mat. 1.7131 ~ 58 HRC

AWS-Knock out rods - DME - Mat. 1.7131 ~ 58 HRCD-M-E 04.08.2020

FB 140 Locating sleeves - DME - Material DME 76 1.7131 ca 60 HRC

FB 140 Locating sleeves - DME - Material DME 76 1.7131 ca 60 HRCD-M-E 12.04.2024

SE 620 Hexagon socket screw keys - chrome plated - DME - Mat.: 50 CrV4 - DIN 911

SE 620 Hexagon socket screw keys - chrome plated - DME - Mat.: 50 CrV4 - DI...D-M-E 18.04.2024

R 23 Locating rings - DME - Mat. 1.7130

R 23 Locating rings - DME - Mat. 1.7130D-M-E 16.04.2024

SVK Jiffy matics - DME

SVK Jiffy matics - DMED-M-E 08.08.2018

AG Sprue bushings - DME - Standard Material 1.2312 ca 38-47 HRC

AG Sprue bushings - DME - Standard Material 1.2312 ca 38-47 HRCD-M-E 16.04.2024

K 7580 Guided ejection system - DME

K 7580 Guided ejection system - DMED-M-E 16.04.2024

R05 Locating sleeves - DME - Euro - Standard Material 1.7131 60 HRC

R05 Locating sleeves - DME - Euro - Standard Material 1.7131 60 HRCD-M-E 12.04.2024

AGM Sprue bushings - DME - Standard Material 1.2312 ca 38-47 HRC

AGM Sprue bushings - DME - Standard Material 1.2312 ca 38-47 HRCD-M-E 16.04.2024

FW 34 Sprue puller bushings - DME - Mat.50 CrV4 - DIN 911

FW 34 Sprue puller bushings - DME - Mat.50 CrV4 - DIN 911D-M-E 18.04.2024

FW 28 Support pillars - DME - Mat. 1.1730 - 640 N/ mm

FW 28 Support pillars - DME - Mat. 1.1730 - 640 N/ mmD-M-E 16.04.2024

ODN Date stamps - remove inner insert from the outer insert using a screwdriver - DME - Mat.: Corrosion resistant steel: 50-55 HRC T 150°C

ODN Date stamps - remove inner insert from the outer insert using a screwdr...D-M-E 14.12.2021

OSN Date stamps - remove inner insert from the outer insert using a screwdriver - DME - Mat.: Corrosion resistant steel: 50-55 HRC T 150°C

OSN Date stamps - remove inner insert from the outer insert using a screwdr...D-M-E 14.12.2021