R 091 Disks for tubular dowels - DME - Material 1.7131 60 HRC - D-M-E

??

CADモデル選択

パーツ比較に追加

選択可能な製品数: 5

HELP_VARIABLE


Company	D-M-E
Description	R 091 Disks for tubular dowels - DME - Material 1.7131 60 HRC
Bill of material	R09118004
REF Catalog Number	R09118004 R09118004
H Thickness	5 5	mm
D Diameter	18 18	mm
D1 Diameter d	8.5 8.5	mm

追加の情報

このページを訪れたユーザーが閲覧したその他のデータ

PM Shoulder screws - DME - Mat. 35 NC 6 ±1100 - 1200 N/mm2

PM Shoulder screws - DME - Mat. 35 NC 6 ±1100 - 1200 N/mm2D-M-E 16.04.2024

R 22 Locating rings - DME - Mat. 1.7130

R 22 Locating rings - DME - Mat. 1.7130D-M-E 16.04.2024

WZ 8031 VL Light green die springs, rectangular wire ISO 10243 - DME

WZ 8031 VL Light green die springs, rectangular wire ISO 10243 - DMED-M-E 30.04.2024

WZ 8030 XH Green die springs, rectangular wire - DME

WZ 8030 XH Green die springs, rectangular wire - DMED-M-E 30.04.2024

DHR 78 Sprue bushings 2° - DME - Euro-Standard Material 1.2826 ca 54 HRC

DHR 78 Sprue bushings 2° - DME - Euro-Standard Material 1.2826 ca 54 HRCD-M-E 16.04.2024

OBN Date stamps - remove inner insert from the outer insert using a screwdriver - DME - Mat.: Corrosion resistant steel: 50-55 HRC T 150°C

OBN Date stamps - remove inner insert from the outer insert using a screwdr...D-M-E 14.12.2021

YOS Date stamps - inner inserts - DME

YOS Date stamps - inner inserts - DMED-M-E 25.02.2022

APD Angle Pins - DME - Material 1.7131

APD Angle Pins - DME - Material 1.7131D-M-E 16.04.2024

AGK Sprue bushings - DME - Standard Material 1.2312 ca 38-47 HRC

AGK Sprue bushings - DME - Standard Material 1.2312 ca 38-47 HRCD-M-E 16.04.2024

R 53 Snap rings for spindles - DME - DIN 471

R 53 Snap rings for spindles - DME - DIN 471D-M-E 30.04.2024

SK 90° Jiffy Tites - DME

SK 90° Jiffy Tites - DMED-M-E 03.04.2024

JL Connector 90° for tube - DME

JL Connector 90° for tube - DMED-M-E 08.08.2018

CuBe2 - DME - CuBe2 Copper-Beryllium base alloys

CuBe2 - DME - CuBe2 Copper-Beryllium base alloysD-M-E 04.08.2020

AMN Date stamps - remove inner insert from the outer insert using a screwdriver - DME - Mat.: Corrosion resistant steel: 50-55 HRC T 150°C

AMN Date stamps - remove inner insert from the outer insert using a screwdr...D-M-E 14.12.2021