TPS passive pneumatic clamping for torque motors or for rotational axes(for round-shaft guides) - opened with pressure

English	日本語
中文

CAD model selection

Selectable products: 7

HELP_VARIABLE


Company	NBK (Nabeya Bi-tech Kaisha)
Description	TPS passive pneumatic clamping for torque motors or for rotational axes(for round-shaft guides) - opened with pressure
Bill of material	TPS080
BESTELLNUM item number clamping element	TPS080 TPS080
VERFUEGBARKEIT availability	standard
PDF1 data sheet	PDF data sheet
PDF2 installation instructions	PDF installation instructions
PDF3 description	PDF description
GROESSE size of shaft	80 80	mm
HALTEMOMENT static holding torque	140 140	N*m
DRUCK opening pressure min.	5.5 5.5	bar
BDRUCKMAX max. operating pressure	6.5	bar
RICHT installation way	from front
OW Clamping width	80 80	mm
DD outer diameter	175.0 175.0	mm
D1 shaft diameter of collet	80 80	mm
D2 inside diameter / collet	58.0 58.0	mm
B width	25.0 25.0	mm
B1 depth of D1	13.0 13.0	mm
LK1 diameter of mounting holes / casing	164.0 164.0	mm
H1 counter bore depth of mounting holes / casing	3.8 3.8	mm
G3 mounting holes / casing	5.3 5.3	mm
LK2 diameter of mounting holes / collet	70.0 70.0	mm
K diameter of mounting holes	5 5	mm
H2 counter bore depth of mounting holes / collet	3.8 3.8	mm
G4 mounting holes / collet	5.3 5.3	mm
G1 air connection	G1/8
G2 air connection with counterbore for seal-ring	M5 M5
R position of air connection	80.0 80.0	mm
W1 angle between mounting holes / casing	30.0 30.0	°
W2 angle between mounting holes / casing	0.0 0.0	°
W3 angle between air connection and mounting holes / casing	15.0 15.0	°
W4 angle offset dowel hole / collet	22.5 22.5	mm
W5 angle between mounting holes / collet	45.0 45.0	°
Z1 number of mounting holes / casing	12 12	mm
Z2 number of mounting holes / collet	8 8	mm