ULB Core blades - DME - Mat.: DME 5 (1.2344, 38-42 HRC) - D-M-E

Selezione modello CAD

Aggiungi al confronto

Prodotti disponibili: 4

HELP_VARIABLE


Company	D-M-E
Description	ULB Core blades - DME - Mat.: DME 5 (1.2344, 38-42 HRC)
Bill of material	ULB1002
REF Catalog Number	ULB1002 ULB1002
SER Series	10
WMIN Länge	10	mm
R Radius	10	mm
H Height	5	mm
TMIN Länge	15 15	mm
T Length t	15 15	mm
W Width w	15 15	mm
D Diameter d	0 0	mm
L Length l	250 250	mm

Informazioni aggiuntive

Anche gli utenti che hanno visto questo sono interessati

FW 45 Straight interlocks - DME

FW 45 Straight interlocks - DMED-M-E 16.04.2024

ULG T-gibs - DME - Mat.: 1.7225, Surface 60-70 HRC, Core 38-42 HRC

ULG T-gibs - DME - Mat.: 1.7225, Surface 60-70 HRC, Core 38-42 HRCD-M-E 03.04.2024

ULC U-couplings - DME - Mat.: DME 5 (1.2344), Surface 60-70 HRC, Core 38-42 HRC

ULC U-couplings - DME - Mat.: DME 5 (1.2344), Surface 60-70 HRC, Core 38-42...D-M-E 08.08.2018

N Connector plugs with teflon seal - DME

N Connector plugs with teflon seal - DMED-M-E 03.04.2024

Flat ejector pins - hardened - FK Typ(e) DIN 1530/ISO 8693, 250°C, Material 1.2210

Flat ejector pins - hardened - FK Typ(e) DIN 1530/ISO 8693, 250°C, Material...D-M-E 30.04.2024

VA Vacuum-/Compressed air-valves - DME

VA Vacuum-/Compressed air-valves - DMED-M-E 03.04.2024

FN Connector plugs for FSK and FSVK - DME

FN Connector plugs for FSK and FSVK - DMED-M-E 03.04.2024

ST 15 Extension nipples - DME

ST 15 Extension nipples - DMED-M-E 08.08.2018

CCT - CCTP Cycle counter CUMSA - DME

CCT - CCTP Cycle counter CUMSA - DMED-M-E 27.11.2017

VZ 1010 Adjusting screws - DME

VZ 1010 Adjusting screws - DMED-M-E 27.11.2017

WZ 1030 Pinion shafts - DME - Mat.: 1.2767 ~ 830 N/mm2

WZ 1030 Pinion shafts - DME - Mat.: 1.2767 ~ 830 N/mm2D-M-E 08.08.2018

Ejector pins - hardened - D Typ(e) DIN 1530, 250°C, Material 1.2210

Ejector pins - hardened - D Typ(e) DIN 1530, 250°C, Material 1.2210D-M-E 30.04.2024

WZ 1070 Taper roller bearings - DME - Mat.: Steel - DIN 720

WZ 1070 Taper roller bearings - DME - Mat.: Steel - DIN 720D-M-E 30.04.2024

ERS pistil - DME

ERS pistil - DMED-M-E 20.01.2022