PN 1682 Ejector rods for pneumatic quick release couplings - DME - Mat.:1.5919 - D-M-E

??

Селекция на CAD модел

Add for comparison

Налични продукти: 3

HELP_VARIABLE


Company	D-M-E
Description	PN 1682 Ejector rods for pneumatic quick release couplings - DME - Mat.:1.5919
Bill of material	PN168216
REF Catalog Number	PN168216 PN168216
D1 Diameter d1	16 16	mm
L Length l	180 180	mm
L1 Length l1	50 50	mm
L2 Length l2	31 31	mm
SW1 Accross-flats dimension	13 13	mm

Additional Information

Потребителите, които са гледали това, също се интересуват

Flat ejector pins - hardened - FK Typ(e) DIN 1530/ISO 8693, 250°C, Material 1.2210

Flat ejector pins - hardened - FK Typ(e) DIN 1530/ISO 8693, 250°C, Material...D-M-E 18.04.2024

PN 1680 Pneumatic quick release couplings - DME - Mat.:1.5919

PN 1680 Pneumatic quick release couplings - DME - Mat.:1.5919D-M-E 27.11.2017

Ejector pins - bath nitrided - TA Typ(e) DIN 1530/ISO 6751, 500°-550°C, Material 1.2344

Ejector pins - bath nitrided - TA Typ(e) DIN 1530/ISO 6751, 500°-550°C, Mat...D-M-E 18.04.2024

PN 1681 Ejector rods for pneumatic quick release couplings - DME - Mat.:1.5919

PN 1681 Ejector rods for pneumatic quick release couplings - DME - Mat.:1.5...D-M-E 27.11.2017

CCT - CCTP Cycle counter CUMSA - DME

CCT - CCTP Cycle counter CUMSA - DMED-M-E 27.11.2017

AKO Accelerated knock-outs - DME

AKO Accelerated knock-outs - DMED-M-E 08.08.2018

PN 1685 Control valves - DME

PN 1685 Control valves - DMED-M-E 27.11.2017

VZ 1010 Adjusting screws - DME

VZ 1010 Adjusting screws - DMED-M-E 27.11.2017

Ejector sleeves without head - ETV, Material 1.8550, nitrided

Ejector sleeves without head - ETV, Material 1.8550, nitridedD-M-E 02.02.2024

ZHI End caps-in - DME

ZHI End caps-in - DMED-M-E 03.04.2024

HZ 160 S Hydraulic cylinder - DME

HZ 160 S Hydraulic cylinder - DMED-M-E 27.11.2017

WZ 1030 Pinion shafts - DME - Mat.: 1.2767 ~ 830 N/mm2

WZ 1030 Pinion shafts - DME - Mat.: 1.2767 ~ 830 N/mm2D-M-E 08.08.2018

Flat ejector pins - nitrided - FW Typ(e) DIN 1530/ISO 8693, 500°-550°C, Material 1.2344

Flat ejector pins - nitrided - FW Typ(e) DIN 1530/ISO 8693, 500°-550°C, Mat...D-M-E 18.04.2024

Flexible Ejector (with mounting thread) - AW 275 CUMSA, Material 1.8159 - 45 ± 3 HRC

Flexible Ejector (with mounting thread) - AW 275 CUMSA, Material 1.8159 - 4...D-M-E 02.02.2024